Solar installation training
Installation work is judged on what happens after the crew leaves: whether the array performs, whether the terminations hold, and whether the paperwork stands up. These modules build the sequence discipline and site judgment that separate a system that passes inspection from one that keeps producing service calls.
What is covered
These are the actual modules from the Solar Technical Training program — the same content enrolled technicians work through.
Solar fundamentals for field technicians
Learn how a solar system behaves before you touch it. Follow the power from the panels to the service panel. Learn what normal output looks like. Know which parts can still carry electricity after the AC switch is open.
Site assessment & system identification
Arrive, classify the architecture in three minutes, walk the site ground-to-roof in a fixed order, and separate what the ticket says from the scope the site actually contains.
Installation sequence & best practices
Learn the order that keeps an installation safe, dry, electrically sound, and ready for inspection. Complete each layer before the next layer hides it.
Commissioning & acceptance testing
Learn to prove a new system works before handover. Run each check in order. Record the expected value beside the measured value.
What you can do afterwards
- Read an unfamiliar PV system on site and describe every block before touching a tool
- Run a site survey a design team can actually build from
- Follow an installation sequence that protects torque, weatherproofing and conductor integrity
- Commission to spec and prove performance with measured, condition-corrected numbers
How it is assessed
Sequence labs mark the order of work, and a checklist lab marks the commissioning evidence. Landing a safety-critical step late is an automatic fail, not a deduction.
Ready to start the solar track?
Sixteen modules, graded field labs, and a four-stage capstone. Enrol once — no subscription, no cohort dates.
Frequently asked
- Is this a replacement for a licence or an electrical qualification?
- No. It is technical training that builds field judgment. Licensing, permits and code compliance are governed by your local authority and employer, and remain your responsibility.
- Do I need my own equipment to complete the installation modules?
- No. The labs are worked as graded scenarios online. You bring what you already see in the field; the training supplies the situations and the marking.
After the labs, you know which exam to book
- After the labs, you know which exam to book. Prep here for EPRA, NABCEP, EPA 608, NATE, CEC, SAQCC Gas and ESSCI, then book with that body when the labs are done.
- EcoPowerHub Academy is the prep and issues its own completion record. The examining body is the issuer of the credential you sit for.
- Work on photovoltaic, battery, and electrical systems involves potentially lethal voltages and must only be performed by qualified persons, in accordance with applicable codes, regulations, and employer safety programs.
- Labs and materials are educational. The technician and their employer remain solely responsible for safe work practices, isolation, PPE, and compliance on actual jobs.
- Exam and licence fees are paid to the examining body. Academy completion is training.